OmniWall Porter Cable 20Vmax Rapid Charger Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Porter Cable 20Vmax Rapid Charger Mount for OmniWall panels.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This mount provides a secure hold and use-friendly orientation when attaching a Porter Cable 20Vmax Rapid Charger to OmniWall panels. There are 3 holes that align with the board's round holes in case extra security is desired.
I suggest printing in the orientation shown in the attached picture. I used PETG, 0.24mm layers, 3 walls (0.6mm nozzle), and 15 percent gyroid infill. Tree supports are required for the hooks and latches.
The hooks lock the charger in place securely, but are a bit tough to bend with the current design. Due to this, the model must be printed in PETG or similar materials that can be temporarily flexed. PLA would most likely snap.