Karlsruhe emblem
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Karlsruhe emblem 3D print with filament swaps at key layers to perfectly replicate the original colors.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 25
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution
Description:
This is a 3D-printed recreation of the emblem of Karlsruhe, Germany. The model is designed to be printed in a single process using manual filament changes at specific layer heights. By switching filament colors during the print (e.g., red, yellow, and black), the emblem is rendered with accurate and vibrant colors—closely resembling the original design.
The text "FIDELITAS" is prominently featured in the center on a diagonal yellow stripe, framed with black borders, against a red background. This multicolor effect was achieved without any post-processing, only by careful filament changes during the print.
Perfect for anyone from Karlsruhe or fans of detailed emblems and multicolor printing techniques!
Printing Tips:
Use a slicer that allows you to insert filament change commands (e.g., PrusaSlicer: M600).
Recommended colors: 1: red (background), 2: white strips 3:yellow (stripe), 4: black (text and outlines).
Pause the print at the correct layers and switch filament accordingly.
Print speed and layer height: standard 0.2 mm for best results.
Enjoy printing!