Planter with Spiral Legs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a planter with separate legs. The planter vessel has a drain hole and the legs have a small water catch.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 156
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a planter with separate legs. The planter vessel has a drain hole and the legs have a small water catch. The vessel was printed with Prusament PLA Marble at 100% infill. The legs were printed in a Creality Wood PLA at 25% infill. The legs do require some supports (organic). but worth the effort. My files contain the paint on seams for the legs, which is really needed to get the best look.
Note: I modified the Spiral Legs from the original to have a deeper water catch.
Thanks