1 / 4
Prusa Core One (+ Gen 1 / + Gen 2 / L) Belt Tension Gauge (New V2 Design) — zdjęcie 1
1 / 4

Prusa Core One (+ Gen 1 / + Gen 2 / L) Belt Tension Gauge (New V2 Design)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

0,46 € – 0,56 € netto (bez VAT)

Dla pliku: G-Code from the Description / belt-gauge_04n_015mm_petg_coreone_36m.bgcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,51 € netto (środek widełek).

Masa podana przez autora
5 g
Czas druku podany przez autora
35,4 min
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Belt Tension Gauge for Prusa Core One (New/Improved V2 Design)

Ocena
4,925 / 5
Polubienia
771
Pobrania
3391
Wydruki
111
Wyświetlenia
13 153
Oceny
107

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Update: Due to the interest in this model I made some aesthetic updates (to make it more readable) in addition to shaving off 0.15mm of thickness (which puts the gauge nearer to the center when the belts are adjusted properly).

If you are anything like me, you struggled to use the Belt Tension app or stroboscope-based method to get your CoreXY dialed in. I made this gauge to get me really close to ideal (which makes the official processes much more tolerable). I hope it helps others… STEP file included if you want to make changes.

Print at 0.15 layer height, structural profile, 100% infill, max print speed of 100 mm/s, with Prusament PETG filament.

It is recommended printing two gauges and fitting them to both belts (adjusting one belt affects the other).

Your mileage may vary BUT my “perfect” settings ended up being near the center (see picture). Don't forget to also square up the gantry: Adjusting Belt Tension (Core One)