LILYGO T-Echo Clip For PALS Bag System

A nice add-on for your T-Echo during your hikes.

Clip that fits the PALS (https://en.wikipedia.org/wiki/Pouch_Attachment_Ladder_System) - or any other belt to be honest.

The accessory also acts as a “finger bumper" so the side buttons are not triggered so much by accident.

Use M3 screws (recommendation to use wide head screw - like for SSD's)  to fasten the T-Echo on the back side to the clip accessory.

Recommended print orientation as on the pictures and in the Prusa Slicer project file (Use tree support).

Recommended material: ASA, 
Print Settings:  100% infill, follow suggested print orientation for best clip performance. ASA has been selected due to strength, higher temp performance and UV resistance

Disclaimer:

THE 3D-PRINTED PART AND ANY ASSOCIATED DESIGN FILES (COLLECTIVELY, THE “WORK”) ARE PROVIDED “AS IS,” WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT. IN NO EVENT SHALL THE DESIGNERS, MANUFACTURERS, AUTHORS, OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES, OR OTHER LIABILITY—WHETHER IN AN ACTION OF CONTRACT, TORT, OR OTHERWISE—ARISING FROM, OUT OF, OR IN CONNECTION WITH THE WORK OR THE USE, INSTALLATION, OR OTHER DEALINGS IN THE WORK.