Wolf Portrait - Hueforge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
Wolf Portrait - Hueforge
Sized so you can print the frame on a standard sized printer. See frame recommendation below.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 180x180mm in size
You may print at higher layer heights below the Base Thickness of 0.24mm
The Max allowed Thickness is 2.08mm and the Actual Thickness is 2.08mm
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyLite Dark Grey Transmission Distance: 1
PLA PolyLite Steel Grey Transmission Distance: 1
PLA PolyLite Grey Transmission Distance: 1
PLA PolyLite White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with PolyTerra Charcoal Black
At layer #7 (0.64mm) swap to PolyLite Dark Grey
At layer #12 (1.04mm) swap to PolyLite Steel Grey
At layer #17 (1.44mm) swap to PolyLite Grey
At layer #21 (1.76mm) swap to PolyLite White for the rest.
I recommend this frame: https://www.printables.com/model/518556-parametric-frame-for-hueforge-filament-paintings
It's a great design and you can set it for any size hueforge print you want. You can use the free version of Fusion360 to create new sizes easily, don't be afraid to try it out even if you've never used Fusion360 before.
Enjoy!