1 / 3
Sonoff SNZB-05P Water Sensor Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you to mount a Sonoff SNZB-05P water sensor to any surface and in any orientation.
- Ocena
- 4 / 5
- Polubienia
- 8
- Pobrania
- 100
- Wydruki
- 2
- Wyświetlenia
- 312
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This holder allows you to mount a Sonoff SNZB-05P water sensor to any surface in any orientation. It features a snug fit and retaining arms so the sensor can even be mounted upside-down. The sensor is easily removed for battery changes. Can be secured using double-sided tape or via the #6 chamfered screw hole in the center.
Print Settings
The assembly in the pictures was printed at the following settings:
- Printer: Prusa i3 MK3.5
- Print Settings
- 0.4mm nozzle
- 0.2mm layer height
- Filament: generic white PETG
- Supports: none
- Brim: none
Print Instructions
- No supports required, no brim needed. Delivered in the proper orientation for printing.
Assembly Instructions
- Simply print the sensor holder and mount it to your desired surface using either double-sided tape or with a #6 wood screw.
- Enjoy!