Canton of Zug Emblem – Multicolor Print with Filament Swaps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Zug canton emblem recreated with filament changes to achieve accurate white and blue layer-based color separation.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution
This is a 3D-printed version of the official emblem of the Canton of Zug, Switzerland. The design is optimized for filament swaps at specific layers to reproduce the emblem’s simple yet iconic color scheme: white and blue horizontal stripes.
By pausing the print at the correct heights and switching filaments, you can achieve a clean, three-color result without any painting or post-processing. The emblem stays true to the original Swiss heraldic design, known for its simplicity and clarity.
Features:
Layer-based filament swap for true color separation
Clean horizontal division between white and blue
Compact and easy to print with high accuracy
Great for Swiss collectors or regional pride displays
Printing Tips:
Use white filament for the base layer(s), then switch to blue.
Ideal layer height: 0.2 mm for color precision.
Use M600 in PrusaSlicer or similar commands to trigger filament change.
No supports needed if printed flat.