nozzle wiper for cr6-se printer extrusion mount

wanted to add a nozzle wiping routine to my start print macro before bed leveling and stable z home, so i remixed the model made for the ender printer to fit my cr6-se and use m5 bolts and T nuts

need to change max position of X stepper to 255, check for yourself if your printer can move that far(idk if theres any changes between printer versions or smthn but always better safe than sorry)

add the macro before the purge line or anything that measures the nozzle such as Z offset or automatic bed leveling before every print

you need to adjust the Z height by yourself to fit where you mount the wiper

[gcode_macro SWIPE]
description: Cleans the nozzle by moving between X=244 and X=254
variable_start_x: 244     # Initial X position
variable_end_x: 254       # Final X position
variable_start_y: 117.5      # Fixed Y position
variable_start_z: 12.15       # Z height for cleaning
variable_wipe_qty: 6      # Number of cleaning movements
variable_wipe_spd: 200    # Movement speed (mm/s)
variable_lift_after: 50   # Z lift distance after cleaning (mm)
gcode:
{% if "xyz" not in printer.toolhead.homed_axes %}
  G28  ; Perform homing if not already referenced
{% endif %}
G90                                         ; Absolute positioning mode
G1 X{start_x} Y{start_y} Z{start_z} F6000  ; Move the nozzle to the starting position for cleaning
# Perform cleaning movements
{% for _ in range(wipe_qty) %}
  G1 X{end_x} F{wipe_spd * 60}             ; Move to X=244
  G1 X{start_x} F{wipe_spd * 60}           ; Return to X=254
{% endfor %}
# Lift the nozzle after cleaning
G1 Z{start_z + lift_after} F1500           ; Raise the nozzle by 50 mm

for assembly info refrence original model, it uses the same parts