1 / 1
Canton of Solothurn Emblem – White and Red 3D Print with Filament Swap — zdjęcie 1

Canton of Solothurn Emblem – White and Red 3D Print with Filament Swap

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Solothurn canton emblem in white and red, 3D printed with filament changes for a clean heraldic design.

Ocena
0 / 5
Polubienia
1
Pobrania
7
Wydruki
0
Wyświetlenia
40
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is a 3D-printable version of the Canton of Solothurn emblem, designed to be printed with a manual filament change for a clean, accurate two-color result. The flag features a white upper half and a red lower half, separated horizontally.

By swapping the filament at the correct layer height, you can recreate this strong and minimalist design without the need for painting or dual-extrusion setups.

Features:

Accurate horizontal split (white over red)

Simple and bold Swiss heraldic design

Works with single-extruder printers

No post-processing required

Printing Tips:

Start printing with white filament.

At the right layer height, switch to red filament then to black.

Recommended layer height: 0.2 mm.

Use the M600 command to insert a filament change in your slicer.

Print flat; no supports needed.

Ideal for Swiss heritage displays, educational use, or personal pride in the Canton of Solothurn. A fast and satisfying print for anyone interested in multicolor emblem printing.

Tagi