1 / 8
Anycubic Kobra 3 filament poop disposer/catcher — zdjęcie 1
1 / 8

Anycubic Kobra 3 filament poop disposer/catcher

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A set to catch Kobra 3 poop between the filament changes

Ocena
5 / 5
Polubienia
78
Pobrania
1435
Wydruki
2
Wyświetlenia
3668
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Share Alike

A set to catch Kobra 3 poop between the filament changes.

It's designed to require a tied installation. To set it up, disassemble the purge wiper and untie the screw that holds the plastic purger guide (marked as X on the second image). Then, the collector should be moved as indicated by the arrows.

Warning: take care of the touchscreen angle. In case it leans too low, it can damage the printer.

V 1.1.1 update: add a bigger version of a bin

V 1.1 update: make collector-bin slider limitless so that it can be assembled either way from any Z/height position

V 1.0 to 1.1 upgrade without reprint: just cut the wall on a collector and two gaps on the bin corner. Now, the bin can slide in from any direction

Category: 3D Printer Accessories

Tagi