Support for RPlidar c1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Support for RPlidar C1 with the ability to also accommodate connection cables
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 116
- Wydruki
- 0
- Wyświetlenia
- 465
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Support for the Slamtec RPlidar C1 lidar, it is designed to house the connection cable and the USB UART converter inside, in order to reduce the amount of wiring cables, a 12 mm hole must be provided, to pass the USB cable, on the surface where the support is mounted.
In addition to the stl file for printing, I also attach the cad file in step format, which can be used both for customizations and as a template for drilling the surface on which the support is mounted.
To fix the support you need four 2.5mm threaded inserts, I recommend those from Ruthex, and four 6-8 mm M2.5 screws, to fix the lidar on the support you need four 6 mm M2.5 screws.
For printing, I recommend placing the piece on the plate with the part that houses the lidar facing upwards and using supports for the inside.
01/06/2026; Added a bottom for mounting on a tripod, requires a 1/4" insert