1 / 1
WP Fork Protection Ring 62,1mm for KTM / Husqvarna 48600698
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A redesign of the OEM Part 48600698 adapted for 3d printing.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 229
- Wydruki
- 2
- Wyświetlenia
- 603
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (33)Powiązane
A redesign of the OEM Part 48600698 adapted for 3d printing.
I split the original design to allow for installation and replacement without uninstalling the forks. A groove was also added to be able to add a piece of wire to increase clamping force on the fork and make sure the guard will fit without trial and error with model scaling.
I also provivided the SolidWorks 2023 file to allow further edits and adjustments.