1 / 3
Water pipe/Toilet Pipe beauty Cover — zdjęcie 1
1 / 3

Water pipe/Toilet Pipe beauty Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A snap together beauty cover for water pipes like are found behind toilets and under sinks

Ocena
5 / 5
Polubienia
10
Pobrania
62
Wydruki
2
Wyświetlenia
231
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Noncommercial

3/7/2026 NEW IMPROVED version features a slanted tapered dovetail connection that requires no supports!

This is a split ring beauty cover for water pipes like are found behind toilets or under sink cabinets. It features super easy to snap together parts, no glue needed! Just slide the male side down into the female side and you are good to go.

The dovetail has fairly tight tolerances so it fits like a glove, but if it's a tad too tight you can just file the connection a tad and it will slip right in.

There are two versions:

1. PETG/PLA/ABS etc. version that are printed in two halves and snapped together (Pictured)

2. Alternate TPU version that is one piece with a split on one side that you flex to slip on (not pictured).

PRINT SETTINGS:

Any hard filament

.2 layer height recommended

4 walls

15% infill is fine

If you would like to leave a tip for my hard work you can do so here :D https://www.paypal.com/ncp/payment/Y5DRF7PN8S5AJ