Gridfinity 2x3 Bin for Mitutoyo Dial Indicator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity compatible 2x3x4u bin for Mitutoyo 2050AB-19 Dial Indicator (flat back, 20mm travel). Filled, non-stackable.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 147
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Gridfinity compatible bin, 2x3x4 units, filled, with cutout for a Mitutoyo 2050AB-19 dial indicator, with flat back and 20mm travel. Probably fits other models, but that's untested, so YMMW. Finger grip pockets, spare volume used for a ‘random stuff pocket’, all edges chamfered.
This bin is non-stackable, and the bezel protrudes from the top by a couple of millimeters.
The base bin was generated using a parametrised master in onshape, https://cad.onshape.com/documents/da63511fc7a354bf59d63372/w/9b39a52da86f733dc31f8a00/e/73b27dcbe7de0b0988c0b3fb, cutout designed and tested by myself. Prints without issue with PLA, fast 0.2mm layer settings, 10% infill, no ironing. You can probably do whatever, these are not fussy.