Minecraft Diamond Sword
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Minecraft Diamond Sword based on 20x20 mm 3D printed pixels
- Ocena
- 4,714 / 5
- Polubienia
- 516
- Pobrania
- 2562
- Wydruki
- 7
- Wyświetlenia
- 30 281
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
You have to print every pixel in the "desired" color. For easier printing they are named accordingly to a color. In addition you can see the "type" of block in the name as well as the number of blocks you have to print from this type and in this color.
E.g.: “Light grey x4_38”
This transfers to:
- Color: Light grey
- Type: 4x connections
- Number: Print 38 pieces of this connector in the color light grey.
Use the image as a reference for building your pixelart. It took me around 0,5h to assemble and only ~ 40 hours to print. I recommend laying out all Pixels first and assembling it after you arranged all pixels. :)
I recommend printing a bunch more snap fits. Because you will have to break them if you made an error during assembly. ;)
I also made one which you can see here: