Revo Roto Stealthburner mount remix with PG7 umbilical spacer for Duet ROTO toolboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A PG7 umbilical mount sitting above the Duet Revo toolboard for CAN cable strain relief for the stealthburner mount.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 185
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I was looking for a way to add good strain relief and change to an umbilical for my Voron 2.4. I modified the stealthburner mount to flatten the side and created a spacer that gets sandwiched between the Roto toolboard and the mount.
The design meant having to modify the original mount to flatten it for the spacer. If you already have the roto mount, you can always just saw off the protrusions to flatten to save time.
There is a longer and shorter version of the spacer. The short version fits the stock cable that comes with the Roto toolboard, at least with the PG7 gland I purchased from CPC. If it's not enough room or you have a larger custom cable, use the taller one.
I printed this in ABS and needed supports for the overhang of the threads.