Cat Paw Ring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A ring with cat paw prints in two parts.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 102
- Wydruki
- 1
- Wyświetlenia
- 261
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a cat paw print ring. It is split into an inner and outer model so you can combine colors as you wish. My partner likes the outer in glow in the dark, with the inner in black. The model has a ring size of 6 (16.5 mm inner diameter) - scale XY-axes as needed for sizing. It's designed so the inner and outer press fit together, but you can add a few beads of super glue if you find they are slipping. You'll want to print the outer band with 0.1 mm layer height to get good detail on the paw prints.
If you want to maintain interference fit while scaling you need to scale the inner and outer at slightly different ratios. Scale the inner band for your ring size then scale the outer band by this formula: outer_scale = (inner_scale * 18.52 - 0.04)/18.48. That will maintain a 0.04 mm interference.