Gamegenic Games' Lair Deck Lifting Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is deck lifting tray compatible with the Gamegenic Games' Lair (or any vertical deckbox)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this deck lifting tray because I got sick of exploding 12 million cards everywhere when trying to lift cards out of my games' lair deckbox. This should also be compatible with any deckboxes that store the cards vertically (but not piled) and have at least 10mm of clearance.
Printed on my K1 Max with 0.2mm layer height, 0.4mm nozzle, and 10mm mouse ears because they're a lot easier to remove than full brim.
It can stabilize the deck while freestanding, but it's not a deckbox and I would not recommend leaving it freestanding as I did in the demo photos.