Swimming Pool Aerator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print swimming pool aerator
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 54
- Wydruki
- 1
- Wyświetlenia
- 410
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an aerator - if you're lucky this will cool your pool down a few degrees and you won't need to get a chiller. This works great for our pool and it knocks down the temperature about 5 degrees F which gets it back in the warm, but still comfortable zone. I copied the design from a store-bought aerator - shown in the desktop pictures (white) I recommend printing this solid and from Nylon - no need for fiber reinforcement. I have had great luck with Fiberlogy PA12 Natural. The blue sample is printed from PETG - it is what I had loaded. I tried the nylon one and it works great - the pics of the installed aerator are of the nylon one that I made. These are cheap enough to buy, but I prefer to make as much as I can and it is always cooler to say you made something rather than bought it.
PRINT THIS THREADS DOWN AND USE A BRIM!! Especially with Nylon!!! No supports are needed when printing threads down.