1 / 1
PET Bottle Foamer new nozzles plus 1/2 and 3/4 in hose adapters
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made new nozzles. also made body with 3/4 and 1/2 inch hose threads
- Ocena
- 0 / 5
- Polubienia
- 33
- Pobrania
- 101
- Wydruki
- 0
- Wyświetlenia
- 959
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (13)Wydruki i komentarze (Wydruki: 0) (Komentarze: 3)Remiksy (0)Kolekcje (34)Powiązane
I made new nozzles including a foamer v2 which is a cylindrical version, a v2 small, and different side variations of the standard nozzles. the v2 has a built in mesh that is not removable so you don't have to worry about tolerances. Last the 34 hose is for ¾ in hosing and 12 hose is for ½ inch hosing. none are tested yet but will be in the future. (this is a work in progress progress so please leave you opinions and recommendations in the comment section)