1 / 6
Parametric organizer box trays/shelves for Skadis with T-Clip system — zdjęcie 1
1 / 6

Parametric organizer box trays/shelves for Skadis with T-Clip system

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

IKEA Skadis trays to contain plastic organizer boxes, using T-Clip system, with parametric OpenSCAD file

Ocena
0 / 5
Polubienia
16
Pobrania
42
Wydruki
0
Wyświetlenia
266
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

I looked at a number of Skadis trays/shelves to put all my random plastic organizer boxes onto, but I couldn't find any model that had every size I wanted, and the parametric ones weren't OpenSCAD, so I just made one.

I included some sample sizes for the ones I'm printing for our boxes, but the main thing I'm publishing is the .scad file so you can make your own sizes. You'll need to adjust the paths to point to the T-Clip seat models on your system (included in downloads).

I recommend using low-profile t-clip hooks where possible :) I only printed in PETG so far. Generally no supports are needed, but if you use the T-Clip seats with locating pins (from here, mainly needed when you have one hook), you may need to.

.scad Changelog:

  • v1: Initial release. It works for me, but I didn't clean the code up much or test for edge cases. Let me know if you find any!

Tagi