Aperture Mask / Primary Mirror Mask for Newton Skywatcher 200mm (8"), d=196 mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Primary mirror mask for Newton Skywatcher 200mm (8"), diameter 196 mm to mask the holders and a imperfect mirror edge.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 97
- Wydruki
- 0
- Wyświetlenia
- 290
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- GNU General Public License v3.0
It is recommended to add an aperture mask to cover the rubber holders. These protrude into the mirror surface area what you can see in the diffraction spikes on bright stars.
Printing:
~ 25 grams, Nozzle 0.4 mm or 0.6 mm (usually faster), material doesn't really matter, PLA or PETG, layer height 0.2 mm or 0.3 mm, 2 wall loops, 3 bottom layers, 4 top layers, infill 10%, no brim.
Painting
It is recommended to paint the mirror mask with black anti-reflective paint or to cover the top and bottom with an adhesive foil made of black velour velvet fabric.
I covered one side with foil and one side with paint. Painting the inside diameter is important!
Assembly
Gently tight the mirror holders. Do not tight too much, this induces stress on the mirror and can lead to visual impairments.
Some people recommend taking a sheet of paper, placing it between the mirror and the rubber buffer and pulling it tight until the paper is a little harder to pull out.
Sizes
Customize the FreeCAD model to your needs.
You can find a mirror mask for Skywatcher Newton 150 mm here.
-------------------------------
The only reward for a hobbyist is likes.
Support / Donation for my work