Cover main mirror for Skywatcher Newtonian telescope 200 mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple cover to keep disturbing light away from the mirror side of the Skywatcher Newtonian telescope 200 mm (8")
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- GNU General Public License v3.0
Simple cover for skywatcher newtonian telescope 200 mm (8") for use after colimating.
Printing
About 152 grams, PETG recommended, Nozzle 0.6 mm (usually [much] faster than 0.4mm nozzle), Layer height 0.3 mm. No support needed, wall loops 3 (maybe more if you print with 0.4 mm nozzle).
If you think the cap is too loose, you can apply adhesive tape to the inner diameter and adjust the fit to your needs.
-------------------------------
The only reward for a hobbyist is likes.
Support / Donation for my work