Meanwell Power Supply Case with Fan LRS150
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a new power supply for my laser engraver and could not find one ready to go. However a Meanwell 24v 6.5A…
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 32
- Wydruki
- 1
- Wyświetlenia
- 263
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a new power supply for my laser engraver and could not find one ready to go. However a Meanwell 24v 6.5A LRS150 was a perfect fit. Could not find a full enclosure however and as I have kids around wanted it to be a little more protected. Incorporated a 24v fan for cooling.
This is v1.0
Future versions I am considering adding in a voltmeter to read output voltage at all times and possibly and Amp meter and temp gauge but that's all probably overkill.
Printed with PETG, 15% infill, Does require some screws to mount the fan and screw down the power supply
Category: 3D Printing
