Haefele Kurzarmscharnier mounting Block
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Block to mount
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
If you extend the existing hinges over 90°, the base bends and breaks after some time.
This part replaces the base. There will be no ajustability left, so see how your existing hinge is ajusted, and then adjust this part prior to printing. You can either move the face in CAD or slicer, or use washers or (printed!) shims. The current design is for the lowest ajustment level.
You will need a m4 nut or a heatset insert. You will also need longer M4 Screws (with the current design).
Hint: this might not replace the hinge that broke as it is not heavy duty enough, but you will be able to swap hinges from door to door to have metallic hinges at the heavy doors and the light doors will end up with this printed base.
Print on the cutoff plane:
