Basic Small 3D Printing Tools Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple organizer for commonly used printing tools. Made to use minimal filament. Item WxLxH is 140mm x 115mm x 45mm
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 138
- Wydruki
- 0
- Wyświetlenia
- 897
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Simple organizer for commonly used printing tools. Made to be small, strong and space-conscious. Uses ~110g of filament with 15% rectilinear infill.
Sample in picture was printed using the 0.20mm Quality setting on PrusaSlicer w/ top surfaces ironed.
*Check your specific tool measurements to ensure they will fit! Feel free to remix the file and modify to your needs.
Dimensions are as follows:
General
Overall Footprint - 140mm (W) x 115mm (L) x 45mm (H)
Tray - 119mm (W) x 82 (L)
Upper Area
Caliper Slot - 16mm (W) x 6mm (L) x 43mm (H) (Fit my calipers snugly, make sure yours will fit!)
USB Slot - 16mm (W) x 6mm (L) x 21mm (H)
Putty Knife / Scraper Slot - 44mm (W) x 18mm (L) x 43mm (H)
Flush Cutter Slot - 60mm (W) x 13mm (L) x 43mm (H)
Lower Area
2x Pencil / X-Acto Knife Holes - 8.5mm diameter
Hex Wrench Slots - 2/3/4/5/6mm
Super Glue Holder - 12.5mm diameter