PCEngines APU Shelf 10 inch Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 10 inch rack shelf for a PCEngines APU-board
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 399
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This shelf holds a PCEngines APU-board. It is compatible with all APU versions, since the dimensions of all cases are the same (W: 168, L: 157, H: 30 in mm). The dimension of the cutout is 170x32.
UPDATE: The front plate was too thin, so the shelf sagged a bit by the weight of the APU. I made the model thicker and the shelf wider. I also added a small retainer in the back the APU can lie on. No need for a felt glider or similar anymore. The pictures are still the old version.
There are 3 models available. One for M3 heat inserts with a depth of 4mm. One with 2.5mm tap holes for screwing in short M3 screws (untested). And one without any holes dedicated for screws.
Print it with the frontplate down to avoid too much support.