1 / 7
3DOM Makita LXT (18V) / XGT (40V Max) 4xBattery holder — zdjęcie 1
1 / 7

3DOM Makita LXT (18V) / XGT (40V Max) 4xBattery holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Makita battery holder for four batteries. Works with 18V (LXT) batteries and 40V Max (XGT) batteries. A remix of…

Ocena
5 / 5
Polubienia
62
Pobrania
730
Wydruki
3
Wyświetlenia
3439
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial

Makita battery holder for four batteries. Works with 18V (LXT) batteries and 40V Max (XGT) batteries. A remix of Jerry's single holder.

Supports only required from the built plate to support the joint tags. It can be done without supports but the tags need a little clean up if in that case.

Intended to be glued after printing tags help strengthen the joint.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

Yes

Resolution:

0.2

Infill:

20%

Filament: Prusament PETG Jet Black Post-Printing =============

Intended to be glued after printing tags help strengthen the joint.

How I Designed This

STL from Jerry's design imported into Fusion 360. I printed the single one to confirm the fit to the battery. Fitted great.

I them duplicated the single one to four and joined them with appropriate spacing, creating a split in the middle and joint tags for strength. This allows printing on the Mk3 print bed.

Print worked first time.

Category: DIY

Tagi