1 / 2
F1 ultra Air Intake for Honeycomb Laser Bed — zdjęcie 1
1 / 2

F1 ultra Air Intake for Honeycomb Laser Bed

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is to create a good seal with the F1 cover and allow for airflow under Honeycomb Laser Bed.

Ocena
0 / 5
Polubienia
8
Pobrania
18
Wydruki
0
Wyświetlenia
324
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a small airflow adapter that fits perfectly into the Xtool F1 Ultra when using the Tocome Honeycomb Laser Bed 235 x 235mm Steel Honeycomb on the print bed.

https://www.amazon.com/dp/B0CQKBXL4D?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 

This makes sure the air goes under the Steel Honeycomb rather than around it generating clean cuts.

Tagi