SKZ Stray Kids Light Stick Stand — Multi-Piece
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stand to hold the Stray Kids Light Stick. Four parts that lock together once printed (frame, base, compass ring/rose).
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 193
- Wydruki
- 1
- Wyświetlenia
- 896
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
My 73-year-old mother has become a huge Stray Kids fan, so I wanted to make her something fun :)
You can print these in whatever colors/materials you like. They should snap together tightly without any glue, but the baseplate may need a little fussing with slicer settings. If it's too large, try tweaking horizontal expansion or set your slicing tolerance to “exclusive” (Cura).
The pictured print used Creality basic white PLA (base), eSun red PLA (frame), Creality purple “hyper” PLA-CF (ring), and some rando brand's silver silk PLA (compass rose). I think I used a .4 brass nozzle and layer height of either .2 or .16.