RFID Tag holder for filament spool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my take on an RFID tag holder for a filament spool.
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 254
- Wydruki
- 1
- Wyświetlenia
- 1353
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v3.0
2026-02-01 Added a new v2 version to use less filament and with 55mm and 60mm versions.
This is my take on an RFID tag holder. I designed this for use with my Anycubic ACE Pro, but it should work for any Multi Material Unit that has RFID tag reading capability like BambuLab AMS and Creality CFS.
This works with filament spools with a 58mm diameter hub, I confirmed this works with an Elegoo cardboard spool (53mm diameter), so anything in-between will also be fine.
I included a variant for Kingroon spools (that's my preferred filament) where the hub isn't as wide as the spool. But really, the regular one worked just fine there, too.
You can pull the RFID tag off an existing spool that has one, or you can write your own RFID tags (if your system's has been decoded). One that works for writing Anycubic's RFID tags is https://github.com/Molodos/anycubic-nfc-filament.
I also included a couple samples where I used my Kobra 3 w/ACE Pro to add text to the RFID tag holder.