resistance band handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
here's my take on resistance band handle
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 183
- Wydruki
- 0
- Wyświetlenia
- 694
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed some handles for my resistance bands exercises, but they are stupidly expensive in stores, and I was not happy with the other models you can find here
So here's mine
I designed it with chamfers rather than fillets ‘cause it’s still better with fdm printers
I printed it vertically, with 100% infill and only 1 wall (and an old pla)
And surprisingly it works
(I thought it would quickly snap in this orientation)
EDIT:
I slightly improved this, making it a bit thinner and with bigger rims
I also added a bigger one, for bigger bands, but it doesn't fit small hands
I left the old version as v1