1 / 1
LM2596 enclosure, vented with 20mm fan, for buck converter — zdjęcie 1

LM2596 enclosure, vented with 20mm fan, for buck converter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

It is vented, has a spot for a fan, and doesn't have embossed text.

Ocena
0 / 5
Polubienia
1
Pobrania
10
Wydruki
0
Wyświetlenia
102
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

My LM2596 boards use standard electrolytic capacitors, which are subsequently taller than the solid caps on other varieties.  I tried a few different models, but they were all a little too short for my boards to fit.  This model on Cults was tall enough, and vented.  It also is set up for a 20mm fan, which I had on hand.

It was embossed, so I used MS 3D Builder to block out the text, and I put a little cylinder in the hole to fill it in, since I didn't need a power button.