Gridfinity thin wall base plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Variations of gridfinity base that have been made thin walled to reduce material use, but maximize stiffness.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 470
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A different variation of the gridfinity base. This “thin walled” variation minimizes material use, but maximizes stiffness.
I found the standard gridfinity base used too much material, and the ultralight was too flexible.
The thin walled version is best of both worlds. ~50% reduction in material, but nearly 90% as stiff. 0.8mm wall thickness, designed for two perimeters with a 0.4mm nozzle.
| Material (g) | print time (min) | Stiffness remaining (%) | |
| Standard gridfinity 5x5 | 32 | 89 | - |
| Ultralight gridfinity 5x5 | 14 | 61 | 15 |
| Thin walled gridfinity 5x5 | 19 | 74 | 90 |
Also including the parametric Blend file used to create the grid. Use the “Master_controller” object and change the custom properties “Grid_X_QTY” and “Grid_Y_QTY” for whatever size desired. Fractional grid sizes are also possible. Uses NURBS for analytically accurate surfaces.