Lominie A120 Sleeve
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protection from damaging glass with metal on glass, as well as preventing water spillage due to capillary action.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution
While I'm sure it was fine, the idea of metal on glass made me uncomfortable, especially under a clamping load. I also noticed there's potential for water to find its way out of the tank via capillary action and I wanted to prevent that (hence the bumps in the sleeve).
I printed in PETG. I also attached the bgcode for a .2 speed profile and it printed in about 25 minutes (note this was sliced with an MMU MK4S as I prefer the starting macros to prevent oozing). No supports needed in the standard orientation. This model fits very tightly on the clamp, if it won't go on try scaling it up to 100.5 or 101%.