Modular drawers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular tools and spear parts organizing box.
- Ocena
- 4 / 5
- Polubienia
- 68
- Pobrania
- 284
- Wydruki
- 0
- Wyświetlenia
- 2087
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Spear parts and small tools drawers with modular boxes. They can be easily stacked together with a little clips (you’ll need 4 of them). With the separators for the Modular drawers box, you can use the narrow drawers. Just slide in 3 in a row and you’re done.
Dimensions are chosen so, that relatively large tools/parts can be stored, but you still can print it on the Prusa MINI/+ printers.
The idea and intentions was to make a simple, practical and printing-friendly model, easy to putting it together, but still having a nice look (design always matter). 😊
No supports needed, but brim is highly recommended for vertically printed parts.
Update 10.02.2022:
All staff in one place.
New boxes.
Update 11.02.0222
Four new large drawers.
P.S.:
Suggestions, comments and prints sharing are welcome!
👍🏻
👉🏻 ❤️