1 / 3
Trak Racer 120 or Any 120 x 40 Aluminum Extrusion 2x4 Mount For Monitors — zdjęcie 1
1 / 3

Trak Racer 120 or Any 120 x 40 Aluminum Extrusion 2x4 Mount For Monitors

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Add multiple monitors to you 120x40 sim rig for way cheaper than the manufactures want to charge.

Ocena
0 / 5
Polubienia
1
Pobrania
9
Wydruki
0
Wyświetlenia
162
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution

I did not want to pay between 2 and 3 hundred dollars on the manufacturer monitor stand to add multiple monitors to my sim rig. I designed these to use 2x4's to create a cross brace to mount monitor arms. I did not even end up screwing the 2x4's into the mounts because the tolerances were so tight.

 

Should work with any 120x40 aluminum extrusion profile and feel free to redesign it for different profile sizes for all other rigs. If you own a trak racer 120 the top holes were not tapped for screws so I just tapped the holes to take bolts of extra hardware that came with the rig.

 

There's 2 different designs listed, one with the trak racer logo and one without.

 

I believe I did 40% infill just for rigidity and supports only for the trak racer logo. Doesn't require supports otherwise. I printed with PETG for rigidity as well.

 

If you like coffee is nice - enjoy!

buymeacoffee.com/tilebyculler

Tagi