1 / 1
FGC-6 mussel brake and flashhider set for the UNW-T6 mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
UNW-T6 mount
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 125
- Wydruki
- 0
- Wyświetlenia
- 509
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (31)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (47)Powiązane
why the new mount? getting the tolerances wise right for the 2 3d printed threads for a 14mm CCW can be tricky and it is prone to ware down when it does match.
so my idea here was to make the threads larger better suited for 3d printing.
but still capable to use the 14mm CCW mounted tracers with the help of a small adapter piece that could be threaded in the tracer and be left in place and just unscrewed by the UNW-T6 threads
if you want to make your own models then I have added a cut template file as well