Geeetech ProW Front Frame Brace
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Front frame brace for the Geeetech ProW, maybe other GT printers as well
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 29
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Geeetech Pro W seems to be quite unbeknownst to modifications, so I made my own. I'm migrating from Thingi to Printables, so this is a re-upload. I do not own this printer anymore.
The ProW's wooden frame itself is not stiff enough to withstand the force of the tensioned belt on the y-axis It makes the frame bend quite a bit, especially on the front plate - but not anymore now. I might have a look at the back plate as well, if this doesn't suffice.
This is remixed from Leo_N's Anet A8 frame brace, as it looks sturdy, yet simple. I also like the idea of the somewhat wide gap in the middle, so you can install different belt tensioners from the original one.
It might fit other Geeetech printers as well, but I can't guarantee that.
If you print it upright, you most probably won't need support as it's just the two M10 holes creating overhangs.
I printed this at work where we use 0.15 mm as standard layer height, but 0.2 will be good as well. Also, it was printed in PLA and it's definitely sturdy enough.