Bike Kickstand Rear-mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bike Kickstand (Fahrradständer), designed for my sons Bulls bike. Based on Bike Kickstand V2, modified for rear mount.…
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 140
- Wydruki
- 0
- Wyświetlenia
- 1485
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Bike Kickstand (Fahrradständer), designed for my sons Bulls bike.
Based on Bike Kickstand V2, modified for rear mount.
Easy to print and assemble, just 4parts:
Outer joint (print flat side down without support and >50% infill)
Leg (with support, >60% infill)
Bolt (no support)
Foot (no support, >30% Infill)
Assembly:
Attach the leg to the outer joint and push the bolt through the hole (e.g. using a hammer).
Put some screws into the small holes in the joints and attach a spring (optional if printed tight).
Push the foot into the leg.
Fits for a 26" Bulls bike, but could be scaled up to larger bikes too.
Printed using GCodePrintr App. http://3dprintapps.de
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
0.25
Infill:
50%
Category: Sport & Outdoors