Bike Kickstand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bike Kickstand (Fahrradständer), designed for my daughters new bike. Improved version of the Bike Kickstand V1 8mm…
- Ocena
- 0 / 5
- Polubienia
- 74
- Pobrania
- 301
- Wydruki
- 1
- Wyświetlenia
- 3888
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Bike Kickstand (Fahrradständer), designed for my daughters new bike.
Improved version of the Bike Kickstand for more stability
- 8mm joint instead of just 6mm
- Inner joint and leg merged into 1 part
- Stylish leg
Easy to print and assemble, just 3 parts:
Outer joint (print flat side down without support and >50% infill)
Leg (with support, >60% infill)
Bolt (no support)
Assembly:
Attach the leg to the outer joint and push the bolt through the hole (e.g. using a hammer).
Put some screws into the small holes in the joints and attach a spring (optional if printed tight).
Fits for a 26" bike, but could be scaled up to larger bikes too.
Printed using GCodePrintr App. http://3dprintapps.de
Print Settings
Prusa I3 MK3S
Resolution:0.25
Infill: 60%