1 / 1
Sturdy bike wall mount for 26mm wooden bars (broomstick)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model has been modified to fit a 26mm broomstick
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 199
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the wall mount from @Sven_2545242 to fit with a 26 mm broomstick
I recommend to print the main part with the flat (front) side down, 5 wall loops and 50-70 % gyroid infill. No support needed.
Please also see the drilling template for perfect holes in a brick wall, as the tolerances are quite small for this model.
