Cat Fishing Rod Toy - Unglued
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This cat fishing rod toy features a functional ratcheting reel with a printed spring to prevent unwanted line release.
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 106
- Wydruki
- 0
- Wyświetlenia
- 858
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Creative Commons — Attribution — Share Alike
Cat Fishing Rod Toy – Right-Handed and Left-Handed Versions
This cat fishing rod toy features a functional ratcheting reel with a printed spring to prevent unwanted line release. It makes a satisfying clicking sound as line is reeled in. This remix was created to eliminate the need for glue by using dovetailed joints, threaded parts, and one heat-set insert/M3 screw combo. This makes it easy to disassemble for maintenance or to replace worn or broken parts.
This download includes two versions of the model:
Right-handle version (original) – Best for left-handed users (hold rod with the left hand, reel with the right).
Left-handle version (mirrored) – Modified for right-handed users (hold rod with the right hand, reel with the left).
⚠ Important: The threading is reversed in this version to ensure proper assembly and reel function when the handle is on the left side.
Print Settings
All parts are properly oriented and designed to print without supports. For best results, print at a 0.2 mm layer height. I used 40% infill, but feel free to experiment with different infill densities.
Bill of Materials
- To build the cat fishing rod toy, you will need:
- ¼" diameter fiberglass rod — I sourced mine from a 36" driveway marker
- M3x10 button head hex screw
- M3xD5xL4 brass heat-set insert
- About 4 meters of cord or string (I used black 95 paracord)
- Cat toy
- Optional: Lobster clasp for quick toy changes
Assembly Instructions
Assembly is identical for both versions, except that the left-handle version (for right-handed users) uses mirrored threads on several components. Make sure to print parts from the correct version folder to ensure compatibility.
- Slide the PoleReelMount into the dovetail socket on the back of the WinderBase.
- Thread the Grip onto the PoleReelMount to lock it in place.
- Insert the Release into the slot in the WinderBase and confirm it moves freely.
- Attach the ReleaseCover with the built-in spring pin to secure the Release mechanism.
- Carefully heat-set the brass insert into the ReelHandle, or use the “NoHeatSet” version and screw directly into plastic (avoid over-tightening).
- Use the M3 screw to attach the ReelHandle to the OuterReel.
- Tie your cord inside the OuterReel, then assemble the reel by threading together:
- InnerReel → InnerReelTeeth → OuterReel
- Insert the reel into the WinderBase and secure it with the ReelCap.
- Slide the ReelGuide over the end of the PoleReelMount, then insert the fiberglass rod and install the PoleGuide(s) and PoleGuideCap.
- Feed the cord through the guides, attach a toy at the end, and go fishing!