1 / 9
Onitama Portable Game - Ultimate Remix with Way of the Wind — zdjęcie 1
1 / 9

Onitama Portable Game - Ultimate Remix with Way of the Wind

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a remix of some various files for Onitama to create a portable version with cards and a magnetic player board.

Ocena
5 / 5
Polubienia
14
Pobrania
120
Wydruki
1
Wyświetlenia
636
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I gathered together a few designs for a portable version of Onitama and changed some things to make what I consider the ultimate portable and printable version. This is optimized for 0.2mm layer heights.

I added a background and some X's to the move spaces of the cards provided by iburge as well as made them thinner to more easily store and feel more like regular cards. These are 0.8mm high and can be printed in two colors, first half one then second half the other, in order to more clearly see everything and to hide them when shuffling.

I scaled down the original player pieces provided by guilherbot to 50% which makes them fit comfortably in the box. I added two versions, one for magnets and one without. These work with 6mm x 3mm magnets but my magnets measure closer to 2.75mm in height so that they sit closer to flush when inserted. If yours are thicker then you may need to add a tiny bit of extra clearance.

I added extra magnets to the game board provided by Archa91 because it was too easy to knock off the lid with just the one provided at each side with light sideways pressure. Some of my pictures show the original design he used. I also recessed the home tile design so that a color change at the layer of the space between tiles would reach it as well in order to show that same color. I then created voids that are 0.8mm x 20mm spaced 0.6mm below each tile. This allowed me to insert ~0.5mm thick pieces of galvanized steel I had laying around into each of the voids after pausing at the layer that covers them while printing. Cutting the pieces ~19x19mm each for the larger voids and ~19x8.5mm for the smaller voids each allows them to fit comfortably but they must be very flat. Using a small dab of super glue helps to hold in place during printing. I also included one without voids for those who don't want to attempt this and don't care about having a surface that will work with magnets. The void for the home space is deeper so there will need to be an extra pause placed in the slicer for that square.

All and all this allows for a complete base set of Onitama! Big thanks to the original designers and I hope you all enjoy!! Also if you don't already own the retail copy of Onitama, please support the original game designer Shimpei Sato by going to Arcane Wonders and purchasing a copy as this is no replacement for the beauty of the original game!

Edit 6/2/2025: When I uploaded this today I accidentally uploaded the wrong stl for the non-magnetic board which was a test file I was working on. The correct one should be there now.

Edit 6/6/2025: I added the Way of the Wind cards, minimized them so they would all fit, and remixed the air elemental figure made by Brite Minis to use as a proxy for the wind spirit. Several additions were added but I left the larger cards for anyone who only likes to play with the base set. Here is a list of what has been added:

  • All cards have been reworked to make them smaller so that everything fits in the original box and the smaller base cards can be found with the expansion file. I also changed the symbol for the position of the figure that is being moved on each card to represent the head of the student and master with a line between them. The wind cards have three wavy lines to represent the position of the wind spirit on them and a long line to separate the two halves of the card.
  • I reworked the base of the air elemental that is being used as the wind spirit in order to add space for magnets. One will hold a single 6x3mm magnet and the other will hold four in a stack to give extra hold for the weight of the figure as mine is printed with 100% infill. This helps especially for the weaker pull at the home bases.
  • I reworked the original model of the students. Because of the small print size I found that the hands they hold in the air were easily broken off. I rotated the arm to have the hand touch the face a bit so that the model would be supported by it. I added these files to the game board folders.

Edit 6/12/2025: I added an additional game board box side that has a raised inner wall so that the box will stay together better and make it easier to put pieces away so that they don't fall over the side while putting the two halves together. I have not reprinted this yet so it has not been tested but I don't see why it wouldn't work. You will now need to print one of each the raised inner wall and the original. I also had the non-magnetized and magnetized board files in the wrong folder so I switched those to their correct location.

Edit 6/12/2025: I realized that the other side of the board needed to be raised to match the inner wall so I designed raised corners that should slot into the holes that I designed on the reworked raised inner wall side. I still have not printed these but I believe everything should line up well for it. I'm just not sure if they will be too thin or not yet. The magnet spaces are in the way of making them thicker. It's only 7mm height though so I think it should still work. I will have to print these to test. You will need to print one board side with the raised wall and one with the corner feet.

Tagi