Articulated Cute Spider
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Articulated Cute Spider (Single, Multicolor or Multipart) I still don't like spiders :D
- Ocena
- 5 / 5
- Polubienia
- 118
- Pobrania
- 706
- Wydruki
- 14
- Wyświetlenia
- 2173
- Oceny
- 13
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Standard Digital File License
Tips for printing:
- Filament: PLA (Good Calibrated Filament! Over-extrusion will lead to problems with the joints!)
- Supports: No!
- Layer height: 0.16mm (optimal)
- Wall loops: 3
- Infill: 15%
- Seam position: back
- Wall generator: classic
- Detect thin walls: No!
- Brim: No!
- BuildPlate: Smooth (Textured Build Plates not recommended!) Use a build plate that you know has good adhesion!
⚠Warning⚠
Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use.
Do not scale the Spider any smaller otherwise the connections will no longer work!
Please be careful when removing the Spider from the print bed!
Colors and filament I used (2 Colors):
- PLA Matte / Black
- PLA Matte / White
Colors and filament I used (3 Colors):
- PLA Matte / Black
- PLA Matte / White
- PLA Matte / Red
Or decide for yourself which colors and how many you want to use!
This model is very filament wasteful please keep that in mind! When you decide to print my multicolor Pre-Sliced (3mf file) for BambuLab I would recommend printing several models at once, not just one, to reduce waste!