1 / 6
Dummy 13 40mm Multi Launcher — zdjęcie 1
1 / 6

Dummy 13 40mm Multi Launcher

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Your SWAT Dummy needs this! Mostly because it looks cool, but also because this 6-shot launcher gets the job done!

Ocena
5 / 5
Polubienia
179
Pobrania
548
Wydruki
3
Wyświetlenia
1634
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

I've been working on this one for a while now. It's a heavily modified version of the M32A1 multi-grenade launcher in use by the US Military. Modified for use by our Dummy 13's, this beauty is perfect for your grenades or less lethal munitions to be launched by your Dummy. An EoTech has been added to the top rail, everything has been strengthened, a safety added (safety third!) and the stock modified.

It's a large launcher, as they tend to be so I'm not sure if it'll print on an A1 Mini or not. I printed mine in .16 and .20mm layers and though both turned out great, the .16 is just perfect and only took 4 hours. It's at 250% (my favorite size), but sizing down, though not tested, would likely be fine to a point. If you go 100% (reduce to 40%) I'd suggest using a .2 nozzle to keep the details.

One note, print with supports, but be warned, the supports cannot reach the tube below the red dot sight, and you'll have to trim some of the droops. As you can see though in the pictures, it still turns out great.

I really hope you enjoy this one. Please share your pics in the comments, I'm a huge fan of that!

Tagi