Pottery Clay Stamp Helper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The adjustable topper supports the base of the piece, to get a perfect stamp on clay pieces without warping the bottom
- Ocena
- 0 / 5
- Polubienia
- 110
- Pobrania
- 365
- Wydruki
- 0
- Wyświetlenia
- 1798
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
Are you tired of your pottery pieces warping when you stamp them? Get a perfect stamp every time on your pieces using this stamping helper. The topper supports the inside of the pottery piece, so you can stamp your piece without any deformation in the clay. The height can be adjusted as high as you need by connecting more pillar pieces.
Printing instructions:
Any material (PLA/PETG) will work fine!
- 1 base
- Print with high infill for more weight at the base
- 1 large pillar
- 1 small pillar
- 1 topper
- 4X screws
- Print as oriented
- Make layer height as small as possible for the top layers to get the best precision and fit
Assembly instructions:
Simply take the screws and build the stamping helper from the base upwards, making it as tall or short as you like.