Gardena Bottom Pump Elevator: Because Nobody Likes Sucking Dirt
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Elevates Gardena 4700/2 pump by 20mm to avoid sludge. Snug fit; add glue/silicone if needed. Fusion file included.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Public Domain
So I got myself the Gardena 4700/2 pump (model 9025-29) and threw it straight into my rain barrel like a responsible adult. Only problem? It was sucking up more mud than water, like it was trying to drain a swamp instead of irrigate tomatoes.
Cue the 3D printer.
This simple but effective Pump Crown design clips onto the bottom of the Gardena pump and elevates it by 20mm — just enough to avoid the sludge layer while still keeping the intake submerged. It’s like a throne for your pump. Because your pump deserves better than sitting in literal dirt.
📐 snug press-fit (but not overly tight — you might want to add a dab of silicone or glue to keep it secure, yet still removable)
🌊 keeps your flow clean, and your filter happier
🧽 no more filter scrubbing after every rainstorm
Printed in PETG for outdoor resilience, but feel free to experiment (and report when PLA melts). No supports needed. Prints flat. 100% gravity-compatible. Probably won't levitate, but your water quality will.