Resin Honeycomb Grid Godox AD200 / V1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
10°, 20° & 30° DIY Honeycomb Grid light modifier for Godox flash AD200 / V1 / AK-R1 for resin printing
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 168
- Wydruki
- 1
- Wyświetlenia
- 2075
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
This is for resin printing only!
If you want to print it with FDM check out my other honeycomb grid here:
https://www.prusaprinters.org/prints/128513-diy-honeycomb-grid-godox-ad200-v1
10°, 20° and 30° honeycomb grid compatible with the Godox AD200 / V1 flash and the AK-R1 kit - that actually works. The included grid in the AK-R1 kit is a joke and does not work very well creating a small soft spot light.
I printed it from black ABS-like resin. I used supports to print this grid - see the pictures above. Maybe it works also flat on the base, I don't know exactly because of the trapped air from the honeycomb grid.
More infos on my blog here: